BALLING ON A BUDGET? WE GOT YOU.
Behold the Conductor’s Special 2HB Spare Tire Delete Kit – your wallet’s new best friend in the world of affordable STD kits. This all-in-one set combines our notoriously loud Shocker XL horns, the STD bracket, and our HornAir 2HB onboard air system, delivering a sound that’s larger than life, without shrinking your bank account.
- The loudest horns we manufacture, be heard for miles!
- Super easy install with the Spare Tire Delete bracket
- Includes all necessary hardware & wiring
- 3-5 second honk time, 65-second recovery
Important Notes:
- VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
- Fits most full-size pickups.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- Adding the S6 extensions to your STDK will increase the width from 20″ to 29″. Please make sure you have the clearance before purchasing.
The video in the link below shows the installation process for our Spare Tire Delete kits!
CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO
The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical “air horn” honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!
CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS
- Shocker XL train horns
- Spare tire delete bracket
- 2-gallon 6 port air tank
- AC-2 air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16″ D.O.T. approved air line
- 17ft of 1/2″ D.O.T. approved air line
- 6ft of 3/8″ air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2″ NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
| Part Number | HK-S4-2HB-STDK |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Shocker 4 train horn kit |
| Horn Material | High-impact fiberglass reinforced ABS |
| Horn Measurements |
№ 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
| Air Tank | HornAir 2-gallon 6 port air tank |
| Tank Length | 17″ (431.8 mm) |
| Tank Diameter | 6″ (152.4 mm) |
| Tank Height | 7″ (177.8 mm) |
| Tank Weight | 10 lb (4.54 Kg) |
| Average Fill Time | 1 minute 10 seconds |
| Air Flow | 1.56 CFM |
| Compressor Length | 8.75″ (222.25 mm) |
| Compressor Width | 4″ (101.6 mm) |
| Compressor Height | 6.6″ (167.64 mm) |
| System Max Amp Draw | 25 Amps |
| Assembled Length | 21″ |
| Assembled Width | 23″ |
| Assembled Height | 13″ |
| Assembled Weight | 40 lbs |
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 2 min. 50 sec. (± 10 sec.) |
| 110 to 150 PSI | 50 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
Our Shocker XL train horns are backed by our lifetime manufacturer’s defect warranty and the rest of the components in this kit are backed by a 2-year manufacturer’s defect warranty! -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
EASY ON THE INSTALL AND THE WALLET.
Transform your vehicle’s presence on the road with the Conductor’s Special 232 Train Horn Kit. Priced with the discerning driver in mind, this kit is tailored to sync flawlessly with our innovative Spare Tire Delete Bracket. At its core is the Shocker XL train horn, emanating authentic, robust notes reminiscent of real train horns. Supported by a resilient 2-gallon air tank and the trusted HornBlasters 3Q air compressor, you’re ensured 3-5 seconds of honk time, with a rapid recovery of under two minutes.
No more enduring lengthy installations. Our Spare Tire Delete Brackets, ideal for most full-size and mid-size trucks, revolutionize the setup process. By replacing the standard spare tire, these brackets facilitate a sleek installation, reducing time from an exhaustive 6-8 hours to a mere 3-4 hours.
- Bracket Excellence: Crafted from robust 14-gauge steel and protected by a two-stage powdercoat, ensuring longevity and a sleek appearance.
- Make Your Presence Known: With a sound that reverberates for miles, this kit ensures your vehicle stands out in any crowd.
- Complete & Ready-to-Install Kit: Everything you need from start to finish is included, ensuring a smooth setup and letting you honk with confidence in no time.
- Weather-Resistant Design: This kit is built to brave the elements, ensuring reliable performance regardless of the conditions.
- Robust Horn Construction: Crafted from fiberglass-reinforced ABS combined with stainless steel internals, these horns guarantee both longevity and unparalleled sound clarity.
Important Notes:
- Fits most full-size pickups.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- Adding the S6 extensions to your STDK will increase the width from 20″ to 29″. Please make sure you have the clearance before purchasing.
- VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
Do you worry about your car being broken into? Our horn kits can help you turn your car into the ultimate alarm system. By connecting the kit to your factory horn, you can not only deter thieves with the loud noise but also alert yourself and those around you of any potential break-ins. Don’t let thieves get away with your personal belongings – protect your car with our horn kit today!
The video in the link below shows the installation process for our Spare Tire Delete kits!
CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO
The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical “air horn” honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!
CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS
- Shocker XL train horns
- Spare Tire Delete bracket
- HornAir 2-gallon 6 port air tank
- hornblasters 3q air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16″ D.O.T. approved air line
- 17ft of 1/2″ D.O.T. approved air line
- 6ft of 3/8″ air line (for air compressors air intake)
- 22ft of 10-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2″ NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Air line cutter
- Earplugs
- Detailed instructions
| SPECIFICATION | |||||
|---|---|---|---|---|---|
| Part Number | HK-S4-232-STDK | ||||
| Honk Time | 3-5 Seconds | ||||
| Operating Pressure | 150 PSI | ||||
| Restart Pressure | 110 PSI | ||||
| Voltage | 12-Volt DC | ||||
| Horn | Shocker 4 Train Horn Kit | ||||
| Horn Material | High-Impact ABS | ||||
| Horn Measurements |
|
||||
| Horn Flare | 5″ (127 mm) | ||||
| Air Tank | HornAir 2-gallon 6 port air tank | ||||
| Tank Length | 17″ (431.8 mm) | ||||
| Tank Diameter | 6″ (152.4 mm) | ||||
| Tank Height | 7″ (177.8 mm) (With Legs) | ||||
| Tank Weight | 10 lb (4.54 Kg) | ||||
| Air Compressor | HornBlasters 3Q air compressor | ||||
| Max amperage | 20 Amps | ||||
| Maximum duty cycle | 100% @ 100 PSI | ||||
| Flow Rate @ 0 PSI | 1.41 CFM | ||||
| Compressor length | 10.1″ (256.54 mm) | ||||
| Compressor width | 4.5″ (114.3 mm) | ||||
| Compressor height | 7″ (177.8 mm) | ||||
| Bracket Length | 19″ | ||||
| Bracket Width | 19″ | ||||
| Bracket Height | 7.5″ | ||||
| Bracket Weight | 6 lbs | ||||
| Assembled Length | 21″ | ||||
| Assembled Width | 23″ | ||||
| Assembled Height | 13″ | ||||
| Assembled Weight | 40 lbs | ||||
| 12-VOLT COMPRESSOR | |
|---|---|
| 2.0 GALLON TANK | FILL RATE |
| 0 to 150 PSI | 3 min. 59 sec. (± 10 sec.) |
| 110 to 150 PSI | 1 min. 33 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
Our Shocker XL train horns are backed by our lifetime manufacturer’s defect warranty and the rest of the components in this kit are backed by a 2-year manufacturer’s defect warranty! -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
THE LAST HORN YOU’LL EVER NEED.
Driving is not just about reaching a destination—it’s about the journey. And the Conductor’s Special 244K Spare Tire Delete Kit is here to enhance that voyage. At the heart of this kit lies the Shocker XL train horn, crafted to capture the very essence of locomotive might.
Our Spare Tire Delete Bracket brings a fresh take on installation, prioritizing both function and form. This, combined with a Stealth Black 1NM Air Compressor and a dynamic 2-Gallon 6 Port Air Tank, positions the kit as a top-tier choice for enthusiasts.
- Signature Sound: The Shocker XL train horn, tuned to perfection, delivers a rich, authentic echo reminiscent of iconic locomotives, echoing across great distances.
- Unwavering Durability: Constructed from fiberglass-reinforced ABS and boasting stainless steel diaphragms, these horns are built to withstand the test of time.
- Streamlined Installation: Our spare tire delete bracket, crafted from 14-gauge steel and finished in a sleek two-stage powdercoat, ensures a durable and seamless setup.
- Efficient Recovery & Extended Honk: The heavy-duty stealth black 1NM air compressor ensures a quick recovery, while the 2-gallon air tank provides roughly 3-5 seconds of honk time.
- Complete Package: This kit comes with all essential mounting hardware, streamlining the setup process for you.
Important Notes:
- VEHICLE FITMENT NOTICE: This bracket is not 100% plug-and-play with all vehicles. 2020-2021 Chevy & GMC 1500 and 3500 series trucks will require some modification to the mounting point for installation. If you are unsure, please contact us for assistance.
- Fits most full-size pickups.
- The spare tire delete kit is shown assembled above for illustration purposes only. The kit will arrive as individual components and assembly will be required. Please check the install instructions in the section below.
- Adding the S6 extensions to your STDK will increase the width from 20″ to 29″. Please make sure you have the clearance before purchasing.
Featured in Danny Duncan’s latest video as the World’s Loudest Horn, our Conductor’s Special 244K proudly resonates from a Bugatti Veyron. Experience the fusion of luxury and power!
CLICK HERE TO WATCH
The video in the link below shows the installation process for our Spare Tire Delete kits!
CLICK HERE FOR SPARE TIRE DELETE INSTALLATION VIDEO
The video in the link below shows our Shocker XL Train Horn in a third-party decibel test alongside your typical “air horn” honked side-by-side at the same pressure. As you can see, no one even comes close to the insane volume and tone of our Shocker XL Train Horns!
CLICK HERE FOR A CUSTOMER VIDEO REVIEW OF THESE HORNS
- Shocker XL train horns
- Spare tire delete bracket
- 2-gallon 6 port air tank
- 1NM Stealth black air compressor
- 110/150 PSI pressure switch w/ 40 amp relay
- Remote mountable intake filter assembly
- Spare air filter elements
- 10ft of 5/16″ D.O.T. approved air line
- 17ft of 1/2″ D.O.T. approved air line
- 6ft of 3/8″ air line (for air compressors air intake)
- 22ft of 8-gauge red wire
- 22ft of 18-gauge blue wire
- 22ft of 18-gauge grey wire
- Black Widow 1/2″ NPT stainless steel electric air valve
- HornBlasters 200 PSI stainless steel liquid-filled air gauge
- Brass NPT fittings kit including a safety blow-off & drain cock
- Complete wiring kit with fuse holder & fuses
- Mounting hardware
- Detailed instructions
| SPECIFICATION | |
|---|---|
| Part Number | HK-S4-244K-STDK |
| Honk Time | 3-5 Seconds |
| Operating Pressure | 150 PSI |
| Restart Pressure | 110 PSI |
| Voltage | 12-Volt DC |
| Horn | Shocker 4 Train Horn Kit |
| Horn Material | High-impact fiberglass reinforced ABS |
| Horn Measurements | № 1 19.50″ (495.30 mm) № 2 16.25″ (412.75 mm) № 3 14.75″ (374.65 mm) № 4 12.75″ (323.85 mm) |
| Air Tank | HornAir 2-gallon 6 port air tank |
| Average Fill Time | 50 Sec |
| Max amperage | 25 Amps |
| Maximum duty cycle | 100% @ 100 PSI / 50% @ 200 PSI |
| Flow Rate @ 0 PSI | 1.75 CFM |
| Assembled Length | 21″ |
| Assembled Width | 23″ |
| Assembled Height | 13″ |
| Assembled Weight | 40 lbs |
| 2.0 GALLON TANK | FILL RATE |
|---|---|
| 0 to 150 PSI | 2 min. (± 10 sec.) |
| 110 to 150 PSI | 35 sec. (± 05 sec.) |
* Supply Voltage: 13.8 Volts
-
Money-Back Guarantee/Refund Policy
All merchandise unless otherwise indicated may be returned within 30 days from the shipment arrival date for a refund. A Returned Merchandise Authorization (RMA) number is required for all returns. A 15% restocking fee may apply. Additional deductions may be made to reflect the products current market value. These terms apply to all refunds. Most products are shipped with a refund/replacement guarantee period unless otherwise noted in the product listing. Customers must inform HornBlasters.com of any order discrepancy within 7 days from the invoice date so that we may investigate and resolve the situation accordingly. -
Warranty
Our Shocker XL train horns are backed by our lifetime manufacturer’s defect warranty and the rest of the components in this kit are backed by a 2-year manufacturer’s defect warranty! -
HornBlasters.com Satisfaction Guarantee
HornBlasters.com offers our customers a 30-day satisfaction replacement or refund guarantee on all purchases, except when otherwise noted in the product listing. -
Cross-Shipments
HornBlasters.com will not cross-ship returned merchandise. -
Physical Damage Policy
Physical damage to any product purchased at HornBlasters.com will effectively void warranty coverage. Physical damage includes but is not limited to improper handling and/or any other type of damage sustained by irregular usage.
